Microscopy Illumination Solutions by Meiji Techno


FT190 Series Fiber Optic Illumination Systems

FT191 Dual Arm Fiber Optic Illuminator

Variable intensity 150W quartz halogen light source with self supporting dual arm light guide can be used in a wide range of illumination tasks. Focusing lenses included. All metal construction. UL-1571 and CE/CSA 2001 compliant. Available in 110V and 220/240V CE approved models. Two Year Limited Warranty. Color temperature: 3200K.

21V 150W Replacement Bulb Part Number: FT190/70       For service/repairs, visit: FTI
FT192 Annular Fiber Optic Illuminator

Variable intensity 150W quartz halogen light source with 60mm I.D. annular light guide fits all RZ and EMZ stereo microscopes; adapter required for EMT and EMF stereos. All metal construction. UL-1571 and CE/CSA 2001 compliant. Available in 110V and 220/240V CE approved models. Two Year Limited Warranty. Color temperature: 3200K.

21V 150W Replacement Bulb Part Number: FT190/70       For service/repairs, visit: FTI
FT190 Fiber Optic Light Guides & Components
 FT190/115 
Light Source: 120VAC, 50-60Hz operation, halogen lamp 21V 150W with variable light intensity regulation. AC cooling fan. (USA)
 FT190/115R
Light Source: 120VAC, 50-60Hz operation, halogen lamp 21V 150W with variable light intensity regulation. Iris diaphragm. AC cooling fan. (USA)
 FT190/230
Light Source: 230VAC, 50-60Hz operation, halogen lamp 21V 150W with variable light intensity regulation. AC cooling fan.
 FT190/230R
Light Source: 230VAC, 50-60Hz operation, halogen lamp 21V 150W with variable light intensity regulation. Iris diaphragm. AC cooling fan.
 FT190/05
Dual arm flexible light guide (23" self supporting) each arm with 8mm active fiber optic bundle. (Requires two FT190/50 lenses)
 FT190/10
Annular light guide (36" flexible) 60mm diameter ring aperture with 10mm fiber bundle.
 FT190/12
Single arm light guide (36" flexible) with special tip to fit EMZ-12, EMZ-12TR, EMZ-12TRD and MC Series Measuring Microscopes.
 FT190/12-60
Single arm light guide (60" flexible) with special tip to fit EMZ-12, EMZ-12TR, EMZ-12TRD and MC Series Measuring Microscopes.
 FT190/70
Replacement Bulb, 21V 150W
 FT190/75
Single arm light guide (18" self supporting) with 5.5mm active fiber optic bundle. (Requires one FT190/50 lens)
 FT190/80
Single arm light guide (36" flexible) with 4.75mm diameter fiber optic bundle. For use with MS-21 Unimac and MSL vertical illuminators.
 FT190/85
Polarizer cap for FT190/50.
 FT190/90
Complete Filter Kit includes: Blue, Yellow, Green, Red and daylight blue tempered filters.
 FT190/95
Single arm light guide (36" flexible) with 4.75mm diameter fiber optic bundle. For use with VM Series Video Microscopes.
 FT190/50

Focusing Lens, 28mm focal length. For use with FT190/05 and FT190/75.

FL150 Series Fiber Optic Illuminators

Photo shows model FL151.

Photo shows model FL152.

FL151 Dual Arm System

FL152 Annular Light System


FL151 Dual Arm Fiber Optic Illuminator

 

Variable intensity 150W quartz halogen light source with self supporting dual arm light guide can be used in a wide range of illumination tasks. Focusing lenses included. UL listed and CSA approved. Available in 110V and 220/240V CE approved models. Two year warranty. Color temperature: 3200K.

21V 150W Replacement Bulb Part Number: FL150/70         For service/repairs, visit: Setra, Inc.

FL152 Annular Fiber Optic Illuminator

 

Variable intensity 150W quartz halogen light source with 60mm I.D. annular light guide fits all RZ and EMZ stereo microscopes; adapter required for EMT and EMF stereos. UL listed and CSA approved. Available in 110V and 220/240V CE approved models. Two year warranty. Color temperature: 3200K.

21V 150W Replacement Bulb Part Number: FL150/70         For service/repairs, visit: Setra, Inc.
FL150 Fiber Optic Light Guides & Components
 FL150/05 Dual arm flexible light guide (23" self supporting) each arm with 0.20" (5mm) active fiber optic bundle. (Requires two FL180/50 lenses.)
Photo shows model FL150/05.
 FL150/10 Annular light guide (36" flexible) 2.37" (60.2mm) diameter ring aperture, 0.374" (9.5mm)fiber bundle.
Photo shows model FL150/10.
 FL150/65/MS22 Mini-annular light guide (36" flexible) 1.22" (31.0mm) diameter ring aperture, 0.317" (8.0mm)diameter fiber bundle. For use with MS-3 and MS-50 Macro Zoom Lenses. Working distance: 2.75" to 4.5".
Photo shows model FL150/65/MS22.
 FL150/75 Single arm light guide (20" self supporting) with 0.25" (6.35mm) active fiber optic bundle. (Requires one FL180/50 lens.)
Photo shows model FL150/75.
 FL150/80 Single arm light guide (36" flexible) with 0.187" (4.75mm) diameter fiber optic bundle. For use with MS-21 Unimac and MSL vertical illuminators.
Photo shows model FL150/80.
 FL150/95 Single arm light guide (36" flexible) with 0.187" (4.75mm) diameter fiber optic bundle. For use with VM Series Video Microscopes.
Photo shows model FL150/95.
 FL150/50 Lens, 28mm focal length. For use with FL150/05 and FL150/75.

Photo shows model FL180/50.

FL-6000 LED Fiber Optic Illuminator


 
Our high intensity, energy efficient LED fiber optic illuminators deliver bright white LED lighting and higher output than 150 watt halogen light sources. Designed for microscopy applications, the FL-6000 supports dual arm, single arm, and annular light guide configurations.

 

Features and Benefits include:
  • Over 20,000 hours of light
  • Up to 780 lumens at fiber insertion plane
  • Linear 15 step light intensity control
  • Maintenance free with no lamps or fuses, and no lamp sockets to wear out
  • Energy efficient, uses 50% less energy than comparable 150W halogens
  • Low heat, cool to the touch

 

Model Number Description
FL-6000-US-DG Dual arm LED fiber optic illuminator - 115V
FL-6000-US-RL Annular LED fiber optic illuminator - 115V
FL-6000-US-SG Single arm LED fiber optic illuminator - 115V

 

Specifications

Light Output: 780 Lumens
Lighting: High Power White LEDs (spectral data)
Input Voltage: 100 - 240 VAC 50/60 Hz
Color Temperature: Typical: 6000 K
LED Life: 20,000 Hours
Fiber Optic Interface: 15mm or (25mm optional)
Operating Temperature: 10 - 40° C
Cooling: Fan Cooled
Dimension/Weight: 3.9" W x 5.1" H x 7.0" DP / 5.3 lbs
Approvals: CE, RoHS

 

 

FIBER OPTIC BACKLIGHTS

Meiji Techno Backlights feature outstanding illumination uniformity and a glass bundle that will not melt when exposed to high energy or heat at the input.

Meiji Techno Backlights fit all fiber optic light sources sold by Meiji Techno including:

FL180 Series
FL150 Series
FT190 Series

MEIJI TECHNO
FIBER OPTIC BACKLIGHTS

The lighting method producing a sharp, high contrast silhouette of an object is known as backlighting.
With machine vision inspection applications, the camera white balance is adjusted to record the illuminated plate correctly, so that any object placed in front of the backlight appears dark and a useful silhouette is created.

However, because light output is very diffused, backlights can also be used for highly specular specimens in transmitted or incident light microscopy.
Meiji Techno carries three sizes of backlights with the following features::

  • Intense, uniform output to insure consistency and optimal performance.
  • The standard bundle length is 36 inches (914mm).
  • Because the fibers are glass, the input can withstand the heat (and light energy) that can melt other plastic fiber products.
  • Meiji Techno Backlights can also be used with most available strobe light sources.
  • Fixture holes in the all aluminum, black anodized body are deisigned for easy mounting
  • The stainless steel input adapter is swaged on stainless steel sheathing for extra durability and long life.
  • Housing thickness is less than 1 inch (25mm).
GUIDELINES FOR MACHINE VISION
Use an active area just large enough to silhouette the product. If the backlit area is too large, diffused light from adjacent areas will create flare and blur the edge, making measurement of the silhouette difficult. If the backlight is too large, use an opaque mask to reduce flaring. If further refinement of the image is required, increase the distance of the mask and the product from the backlight. This has a "collimating" effect which should also improve image quality. It reduces the effective size of the backlight which can work either for you or against you.

Note: The standard diffuser plates are made of acrylic plastic so if your application involves temperatures above 70°C, let us know your requirement.

Part Number
Active Area Housing size Cable Length
View Drawing
FTI-BL50
2x2" (50x50mm) 2.5x4" (63x100mm) 36" (914mm)
View Diagram
FTI-BL75
3x3" (75x75mm) 6.75x4.75" (171x121mm) 36" (914mm)
View Diagram
FTI-BL125
5x5" (125x125mm) 8.75x6.75" (222x171mm) 36" (914mm)
View Diagram
Fluorescent Ring Light for Stereo Microscopes
MA305 Ring Fluorescent Illuminator

 

Lightweight, compact, and rugged, this illuminator provides 360 degrees of cool, white, shadow-free illumination. For use with EM Series stereo microscopes (adapter required). (Available in 110V and 220/240V models) Lamp life: 1,500 hrs. Color temperature: 6500K.

Photo shows model MA305.

(additional photos)

Output: 8W              Bulb: MA305/05
 Mounting Accessories for MA305
MA302
Adapter for EMZ zoom stereo bodies.
MA303

Adapter to mount ring light onto MA507 1.5X aux. lens or MA511 2.0X aux. lens.

MA304

Adapter for EMT-1, EMTR-1, EMT-2, EMTR-2, EMF-1 and EMF-2.

MA307

Adapter for EMT-3, EMTR-3, EMT-4 and EMTR-4.

MA308
Adapter for RZ Series CMO Microscopes Objectives
Standalone Illuminators
MA960 Quadrant LED Ring Illuminator  *New!!!*
 

Our variable intensity Quadrant LED ring illuminators deliver a high level of illumination over a selected field of view with excellent uniformity.

  • Quadrant LED Lighting

  • 60 LED Array

  • 10,000 hour rated lifetime

  • 53mm - 60mm inside diameter

  • Power consumption: 4.8W (Maximum intensity)

  • AC100V to 240V, DC12V AC Adapter

Photo shows model MA964/100.

Photo shows model MA964/100.

  Dimensions:
Length(Depth): 60mm
Width: 150mm
Height: 33mm

Weight: 300g
 

MA964 LED Ring Illuminator
 

Our variable intensity LED ring illuminators deliver a high level of illumination over a selected field of view with excellent uniformity. The ring light cord is approximately 5.5 ft long. Auto voltage sensing.

  • 60 LED Array

  • 10,000 hour rated lifetime

  • 53mm - 60mm inside diameter

  • CE approved

Photo shows model MA964/100.
  Transformer case dimensions:
Length(Depth): 150mm
Width: 60mm
Height: 83mm

Wattage: 10W
 



FR-LED Ring Illuminator
 *New!!!*


The FR-LED  is our newest ring illuminator. It features the newest surface mount LED technology that is paired with our exclusive design criteria, to make the highest performance, longest operating, lowest cost LED ring illuminator sold today! The days of having to buy replacement bulbs are a thing of the past!

Our ESD Safe FR-LED  features instant-on performance, with zero flicker. It is fully dimmable, from 100-0% with an integrated switch on the shade. Our exclusive design also allows for all circuitry to be hidden inside the shade. All other competitors rely on desktop controller boxes for their dimming units… another FR-LED advantage!

Our exclusive heat management system ensures supreme light output, for many years to come. The special thermal transfer system quickly and efficiently cools the LED array, for the longest life span in the industry. We are the only manufacturer to invest such extensive time and money into the development of the world’s best LED ring illuminator.

The FR-LED  features an auto switchable 100-240v power supply, and boasts worldwide regulatory approvals. What this means is that this one unit, can be sold anywhere across the world with nothing more than a cord change for the destination country of choice.           

Unlike many of the low end imported and domestic competition, our FR-LED  array is the only one that can be replaced in the field, as well as can have individual LED chips be repaired, further reducing operating costs over the life span. Many other designs are simply one time use ‘throw away’ builds. We stand behind the FR-LED  with our iron clad 5 Year / 50,000 Hour Warranty.
           
•    Made in the USA
•    ESD Safe and RoHS Compliant
•    Flicker Free and Dimmable from 100 – 0%
•    100-240v Auto Switchable Power Supply with Worldwide Approvals
•    2.35” Mounting Ring Diameter
•    9 LED Surface Mount Array with Exclusive Thermal Management System
•    No Desktop Controller Box
•    Black Molded Shade
•    5 Year / 50,000 Hour Warranty
•    Fits 60- 25 mm diameter units.

Photo shows model FR-LED. FR-LED



Photo shows FR-LED on an EMZ stereo microscope.

FR-LED on EMZ-8TR Stereo
   
MA264 LED Illuminator *New!!!*

 

Variable intensity versatile LED illuminator on detachable articulated arm with swivel joint. Pre-focused three-lens collecting system creates sharply defined spot illumination. CE approved.

       Photo shows model MA264H.
  Illumination source: High Power LED
Home | Contact Us | Choosing a Scope | Products | Literature | Service | Warranty
Copyright © Meiji Techno America - All Rights Reserved.