Heavy Duty Boom Stands

SAS-1 Heavy Duty Articulating Arm Stand 

This industrial-type swing arm stand has a 20mm diameter mounting post for our F, FX or FC focusing holders for stereo microscope optics. It provides complete flexibility for horizontal and vertical adjustment and integrates well with our EM Series Stereo Microscopes.

Our heavy duty tilting and swiveling microscope mount allows the scope to swivel 360 degrees around a vertical axis and to tilt from vertical to horizontal positions. In spite of its flexibility, this heavy-duty mount can still securely lock the microscope in any orientation, even when loaded down with a large camera system. This mount also features a friction adjustment on the tilting motion to prevent the unexpected "flip-over" of the microscope upon release of the tilting lock.

The sturdy solid metal 13 inch x 13 inch x 1.5 inch base (approx. 60 lbs.) with rubber feet provides excellent stability. Focusing holders for SAS-1 can be found on the accessories page.

Photo of SAS-1 Stand.


Photo of SAS-2 Stand.

Photo of SAS Wall Mount.

Photo of SAS Table Mount.

Photo of SAS Table Mount.

Photo of SAS Optical Bench Mount.

Photo of SAS Optical Bench Mount.

 


SAS-2 Heavy Duty Articulating Arm Stand

 

The same great things you love about the SAS-1 but with a longer arm. An industrial-type swing arm stand again uses our F, FX or FC focusing holders. Also works great with our EM Series Stereo Microscopes.


The sturdy solid metal 13 inch x 13 inch x 1.5 inch base (approx. 60 lbs.) with rubber feet again provides excellent stability. Focusing holders for SAS-2 can be found HERE.

 

The SAS-1 and SAS-2 are also available with a steel wall mount with 4" x 10" spaced mounting holes. These present a large stable surface for mounting to a vertical surface. Wall mount adapters for mounting to 16" on center studs are available upon request.

 

 

 

 

Table Mount Versions

The SAS-1 and SAS-2 are also available with a table mount that includes 3 x 3 bolts, washers, and nuts. Requires drilling of (3) 1/2" holes through table top surface. Part number for this mount is OS-0606T.

 

 

 

 

 

 

 

 

 

Optical Bench Mount Versions

The SAS-1 and SAS-2 are also available with an optical bench bread board mount. Specify English or Metric. Part number for this mount is OS-0404T.

 

 

 

 

 

 

 

 


 



BAS-1  Heavy Duty Dual Boom Stand

 

This heavy duty dual arm industrial-type boom stand with 32mm diameter mounting post is just perfect for our RZ Series Stereo Microscope. Provides complete flexibility for smooth horizontal and vertical movement and adjustment.

 

The BAS uses linear ball bearings to support the horizontal arm, allowing it to glide over the work surface with none of the binding inherent in other boom stands. It is now possible to scan a large flat area, such as a printed circuit board, by simply guiding the microscope with your hands.

 

Zero friction motion from precision roller bearings machined into cast housings along with a sturdy solid metal 13 inch x 13 inch x 1.5 inch base with rubber feet provides an excellent solution for heavy duty and industrial applications requiring smooth friction free travel.

 

The BAS-2 with 20mm mounting pole for EM Series scopes is shown below.

 

  

 

Table Mount Versions

The BAS-1 and BAS-2 are also available with a table mount that includes 3 x 3” bolts, washers, and nuts. Requires drilling of (3) 1/2" holes through table top surface. Part number for this mount is OS-0606T.

Table Mount stand    Table mount stand

 

Optical Bench Mount Versions

The BAS-1 and BAS-2 are also available with an optical bench bread board mount. Specify English or Metric. Part number for this mount is OS-0404T.

Optical bench mount stand    Optical bench mount stand

 

 


Photo of BAS-1 Stand.

 

 

BAS-1 Assembly PDF
 

BAS-2 Assembly PDF

Ordering Information
Part Number

Description

BAS-1
Boom Arm Stand, 32mm mounting pole ( fits RZ Series Microscopes)
BAS-2 Boom Arm Stand, 20mm mounting pole ( fits EM Series Microscopes). F, FX or FC focusing holders sold separately.
BAS-3 Boom Arm Stand for Meiji Tilting Focus Block (Model FS sold separately)
SAS-1 Swing Arm Stand,  6 inch arm, 20mm mounting pole
SAS-2 Swing Arm Stand,  12 inch arm, 20mm mounting pole

 Note: Focus blocks must be ordered separately as they are not included with stands.

Photo of RZ Stereo with BAS-1 Stand.
Photo of EM Series with SAS-1 Stand.
The BAS-1 stand outfitted with our RZ Series Stereo Microscope with ergonomic head.

 

            

The BAS-2 stand outfitted with our EMZ Stereo Microscope and LED illuminator.

 

The SAS-1 stand and EMZ-8TR stereo head with video camera attached.  Note that the articulating arm has snap on wire guides that keep wires and fiber optic cables out of the way.

 

The BAS-1 stand with our RZ Stereo Microscope and LED illuminator.

Heavy Duty Stand Dimensions
Photo shows dimensions of SAS-1.Photo shows dimensions of SAS-2.

Photo shows dimensions of BAS-1.
 
Home | About Us | Contact Us | Choosing a Scope | Products | Literature | Service | Warranty
Copyright © Meiji Techno America - All rights reserved.